≡ Menu

Makita MAC2400 Air Compressor Review

Makita MAC 2400 Air Compressor
Last Updated on August 4, 2023 by Marc Smith

In this article we take a look at the very popular Makita MAC2400 Big Bore air compressor. Nearly 90% of consumers gave this model from Makita a 5 star rating. This is data taken from various consumer feedback platforms.  So, let’s dig a bit deeper and find out whether these reviews are a true reflection of this little beast from Makita.

Over the past decade Makita have established themselves as one of the leading manufacturers in the small industrial and home power tool market. This is largely due to the goal of the company to produce top quality tools at extremely competitive prices. As a result the company have gained a huge following in the construction industry.

The Makita MAC2400 air compressor made our list of the 10 best air compressors and is probably the best value air compressor on that list. Let’s take a closer look at this model.

Review Of The Makita MAC2400 Air Compressor

Makita have certainly raised the bar with this series of air compressors. When we look at the features, it is easy to see why the competitors are struggling to keep up.

The MAC2400 have a host of built-in features to make it more efficient and reliable – from lower operating rpm to lower amp usage. The lower operating speed makes the Makita quieter than most of its competitors.

Makita air compressor

Main Features Of The MAC2400

As mentioned earlier, this air compressor is loaded with features to make it more efficient. Here are some of the features Makita introduced with this range:

  • Lower operating speed – The MAC 2400 runs at 1720 rpm. The lower rpm have obvious advantages like a longer life span and lower noise levels. The quiet operation makes it much more suitable for suburban use.
  • Low amp draw – Makita have lowered the amp draw of this compressor to ensure more stability and longer motor life. The lower amps reduce the risk of tripping breakers at start up and voltage drops which can shorten the lifespan of the motor.
  • 2.5 HP motor – A very powerful motor for such a small unit. The improved power is a result of using a 4 pole design in the motor. This allow the motor to produce more CFM while being more efficient.
  • Fast recovery time – This is achieved by using a cast iron pump with a big bore cylinder and piston. More air is produced in less time. The pump is oil lubricated for cooler running temperature and less wear.
  • Improved air filtration system – The company spent a lot of time and money to improve this aspect of the MAC 2400. Poor air filtration can lead to premature failure, and this is why Makita moved to an automotive style air filter.
  • Built in thermal overload protection – This basically means that the motor will shut down when a certain temperature is reached, to protect the motor from heat damage.

Specifications

  • Weight: 77 lbs. This is on the heavy side, but not overly so.
  • Dimensions: 19.38″ D x 18.75″ W. Quite compact for a unit with this amount of power.
  • Operating pressure of 130 psi. Deliver 4.8 cfm @ 40 psi and 4.2 cfm @ 90 psi. Dual outlets to run two ait tools simultaneously. 
  • 4.2 gallon twin stack air tank system.
  • 12.3 amps at full load. This is a reduction from previous models.
  • Average pump life is estimated to be around 2,000 hours. This can obviously be extended by taking good care of your air compressor.
  • Noise – 79 dBA from 3 feet away. The lower noise levels make this model suitable for most jobsites.
Makita MAC 2400 air compressor in box

Conclusion

It is hard to fault this air compressor from Makita. It basically does what it says on the box and it does that very efficiently. The MAC2400 is built to withstand the toughest jobsite conditions. This sturdy, reliable power makes it a huge favourite with contractors and DIYers. Makita have introduced a range of new features in this range to improve power output and durability.

There are many reasons to buy an air compressor and Makita seem to cover all the angles with this product.

Three massive plus points are the longer life span, increased power and lower noise levels. What more can you ask for?

The Makita MAC2400 is a compact, powerful and reliable air compressor. Thousands of online reviews tell the story of many satisfied customers.